▄ PTFE SM-B60 ┉ 、‖。POM CFX-0261、‖。PC AC3800、LDPE 2100TN30W、PC PCN-2004、‖。TPU GP85AE、→，PP C、→，PC04C、‖。PP EPR300、→，LDPE 955I、PP Z433、‖。TPV A70NI-HF、‖。PP P441JU 、→，TPV HX-093AB、‖。PC/ABS HAC6010FG、‖。TPU 400、LDPE LT0470/KJ 、LDPE 4201、‖。PA66 GP2130B、ABS 780M 、PBT 140PG3、→，PC DD0009、PC/ABS LDS3724、→，PP HI5204H PA66/PTFE BN1 GF30/TF15、‖。TPE PB-757、→，PMMA 301、‖。PC HP1REU、PP CA60AM、→，PPE HR-8054M、PA6 K-FG6、ABS SP-0170、PA6 B3EG10、‖。PC 50S5302、‖。PP HI4352L ‖。 18020、‖。PC DX11003、→，EMA 4503HIPS PH-888G、→，EVA Z322、PBT CN7000NN、PA66 S223-C、PC DX-7710Q BK、PA6 PB00A、‖。PC ML-5206ZHSMV、→，LDPE 1018EA 、PBT 3010FRABS的流動特性屬非流體，其熔體粘度與加工溫度和剪切速率都有關系，但對剪切速率更為。2，力學性能ABS有優良的力學性能，其沖擊強度極好，可以在極低的溫度下使用。即使ABS制品被，也只能是拉伸而不會是沖擊。ABS的耐磨性能優良，尺寸性好，又具有耐油性，可用于中等載荷和轉速下的軸承。ABS的蠕變性比PSF及PC‖大，但比PA和POM☆小。ABS的彎曲強度和壓縮強度屬塑料中較差的。ABS的力學性能受溫度的影響較大。3，熱學性能ABS屬于無定形聚合物，無明顯熔點；熔體粘度較高，流動性差，耐候性較差，紫外線可使變色；熱變形溫度為70—107℃（85左右），制品經退火處理后還可10℃左右。對溫度，剪切速率都比較ABS ANC200、ABS AX4000、ABS AX4100、ABS AT5500、ABS ANC100、ABS ANC1201. 良好的流動性2. 優異的抗沖擊性3. 易加工成型4. 易著色、噴涂5. 低氣味6. 良好的耐腐蝕性
The flow characteristics of ABS are non Newtonian fluids. The melt viscosity is related to the processing temperature and shear rate, but it is more sensitive to the shear rate. 2, the mechanical properties of ABS he excellent mechanical properties. The impact strength is excellent and can be used at very low temperatures. Even if ABS products are damaged, they can only be tensile failure rather than impact failure. ABS has excellent wear resistance, good dimensional stability and oil resistance. It can be used for bearings under moderate load and speed. The creep property of ABS is larger than that of PSF and PC, but smaller than that of PA and POM. The bending strength and compressive strength of ABS are inferior to those of plastics. The mechanical properties of ABS are greatly influenced by the temperature. 3, the thermal performance ABS belongs to the amorphous polymer with no obvious melting point; the melt viscosity is high, the fluidity is poor, the weatherability is poor, the ultriolet light can change color, the thermal deformation temperature is 70 to 107 C (about 85), and the products can also be raised about 10 degrees C after annealing treatment. Temperature and shear rate are more sensitive to ABS ANC200, ABS AX4000, ABS AX4100, ABS AT5500, ABS ANC100, ABS ANC1201., excellent fluidity 2. excellent impact resistance 3. easily machined, 4. easy coloring, spraying 5. low gas 6. good corrosion resistance

EVA橡膠足球等。（4）汽車配件有避震器、擋泥板、車內外裝飾配件等。（5）發泡制品：加壓發泡有泡沫塑料拖鞋、涼鞋、建筑材料等。注塑發泡有各種工業零部件，女用鞋底，熱熔粘合劑等。-醋酸共聚物的的成型加工EVA可注塑、擠塑、吹塑、壓延、滾塑真空熱成型、發泡、涂覆、熱封，焊接等成型加工 EVA 150、EVA 210、EVA 220、EVA 40W、EVA P1403、EVA P1405、EVA 450、EVA 210ET、EVA 220ET、EVA 310、EVA 360、EVA 410
EVA rubber football and so on. (4) auto parts include shock absorbers, fenders, interior and exterior decoration accessories, etc. (5) foam products: pressure foam, foam plastic slippers, sandals, building materials, etc. Injection molding foam has various industrial components, female soles, hot-melt adhesives and so on. The molding of ethylene - vinyl acetate copolymer EVA can be molded, extruded, blown, calendering, rolling, vacuum thermoforming, foaming, coating, heat sealing, welding and other forming processes such as EVA 150, EVA 210, EVA 220, EVA 40W, EVA P1403, EVA P1405, EVA 450, EVA 310, 360, 410

TPU可采用常見的熱塑性材料的加工進行加工，如注射、擠出、壓延等等。同時，TPU與某些高分子材料共同加工能夠性能互補的聚合物合金。5.耐油、耐水、耐霉菌。6.再生利用性好。成型品用途汽車部件球型聯軸節；防塵蓋；踏板剎車器；門鎖撞針；襯套板簧襯套；軸承；防震部件；內外裝飾件；防滑鏈等機械?工業用部件各種齒輪；密封件TPU 1260DU、TPU 955、TPU V2464、TPU 955、TPU LP9254、TPU R3001、TPU SP9220、TPU SP9264、TPU SP9267
TPU can be processed by common processing methods of thermoplastic materials, such as injection, extrusion, calendering and so on. At the same time, TPU can be combined with some polymer materials to obtain polymer alloys with complementary properties. 5. oil resistant, water resistant and mould resistant. 6. the regenerative utilization is good. Moulding use automotive parts ball type coupling; dustproof cover; pedal brake; door lock crash needle; bushing leaf spring bushing; bearing; shockproof parts; interior and exterior ornaments; anti skid chain and other mechanical parts gear; seals TPU 1260DU, TPU, V2464, TPU 955, TPU LP9254, TPU R3001, TPU SP9220, TPU. P9264, TPU SP9267

因此，已開始逐步取代天然產品，并進一步發展到用于、石膏代替物和運動保護器材。近年來，利用TPI優異的結晶性和溫度的性，又成功地作為形狀記憶橡膠材料，倍受人們青睞。從結構上來說，TPI是以高的反式結構所形成的結晶性作為硬鏈段，再與其余任意形呈彈性相狀態部分的軟鏈段結合而構成的熱塑性橡膠
Therefore, the natural products he been gradually replaced and applied to plastic surgery equipment, gypsum substitute and sports protection equipment. In recent years, TPI has been successfully developed as a shape memory rubber material because of its excellent crystallinity and temperature sensitivity. Structurally, TPI is a thermoplastic elastomer formed by the crystallization of a high trans structure as a hard chain, and a soft segment that is combined with the rest of the rest of the elastic phase.

TPV主要由二部分組成，一是塑料作為連續相，二是橡膠作為分散相。通常橡膠需要與軟化油或增塑劑與之配合。硫化劑和一些輔助助劑也是必不可少的。另外為了成本或者某方面的性能，一些無機填料會被填加。[1] 中文名熱塑性硫化橡膠外文名ThermoplasticVulcanizate組成一是塑料，二是橡膠簡
TPV is mainly composed of two parts, one is plastic as a continuous phase, and the other two is rubber as dispersed phase. Usually rubber should be combined with softening oil?or?plasticizer. Vulcanizing agents and some auxiliary auxiliaries are also essential. In addition, some inorganic fillers will be added to reduce costs?or?improve performance. [1] Chinese name thermoplastic vulcanizate ThermoplasticVulcanizate is made of plastic and rubber two.
? 建筑建材TPV簡介熱塑性硫化橡膠(英文為ThermoplasticVulcanizate)，聚烯烴合金熱塑性彈性體,簡稱為TPV，熱塑性硫化橡膠的中文簡稱為熱塑性橡膠（英文Thermoplastic Rubber），簡稱為TPR，但這個名稱容易和其它種類的熱塑性彈性體（英文為Thermoplastic Elastomer）相混淆在一起，因為通常熱塑性彈性體也被大家叫做熱塑性橡膠，尤其是類彈性體，至少在似乎"TPR”已經成為它的專有名稱了，一提起TPR，就是指以S、SEBS等類彈性體為基料的熱塑性彈性體，這與類彈性體在民用以及終端消費品領域中消耗量之大是分不開的。TPV 101-80、TPV 121-87、TPV 121-80、TPV 111-35、TPV 111-87、TPV 111-45、TPV 111-80、TPV 8271-75
Architectural building materials TPV thermoplastic vulcanized rubber (ThermoplasticVulcanizate), polyolefin thermoplastic elastomer, short for TPV, and thermoplastic vulcanized rubber (Thermoplastic Rubber) for short, called TPR, but this name is called easy and other types of thermoplastic elastomer (UK) The article is confused with Thermoplastic Elastomer, because normally thermoplastic elastomers are also called thermoplastic elastomers, especially styrene elastomers. At least in China, it seems that "TPR" has become its proprietary name. To mention TPR, it refers to the thermoplastic properties of styrene like elastomers such as S and SEBS. Elastomers are inseparable from the consumption of styrene elastomers in the field of civilian and end consumer goods. TPV 101-80, TPV 121-87, TPV 121-80, TPV 111-35, TPV 111-87, TPV 111-45, TPV 111-80, TPV 8271-75

PP聚丙烯是一種高剛性材料，與PE同屬聚烯烴。均聚料密度低至0.90。可加入玻璃纖維和礦（如碳酸鈣）增強。PP不適合0oC以下使用。如要在零下溫度使用，必須用丁二烯共聚，這樣就產生了共聚PP。均聚PP的的操作溫度是90oC，抗化學品（酸、堿）性能非常好。用均聚PP生產的零部件具有非常低的吸濕性，但注塑時收縮大。電氣性能很好，但耐紫外旋光性能、抗其它穿透性能很差。
PP polypropylene is a high rigid material and belongs to polyolefins with PE. The density of the aggregate is low to 0.90. Glass fibers and minerals (such as calcium carbonate) can be added. PP is not suitable for use below 0oC. If it is to be used at zero temperature, it must be copolymerized with butane, which leads to the copolymerization of PP. The operating temperature of homopolymer PP is 90oC, and its resistance to chemicals (acid and alkali) is very good. The parts produced by homopolymer PP he very low hygroscopicity, but they shrink when they are injected.? Electrical properties are good, but UV resistance and anti penetration performance are very poor.
化學改性的常用：一種是以被改性的樹脂單體為一元，改性單體為另一元，在反應釜內進行接枝共聚并新的共聚物；第二種是將被改性樹脂作為主要原料，通過樹脂分子中的極性元素對其進行有效的改性。
The common methods of chemical modification are: one is one element of the modified resin monomer, the modified monomer is another, graft copolymerization in the reaction kettle and a new copolymer. The second method is to modify the modified resin as the main raw material by increasing the polar element in the resin molecule.

LDPE的特性：低密度聚，是無色、半顆粒，分子中有長支鏈，分子間排列不緊密；低溫韌性很高。
Characteristics of LDPE: low density polyethylene (LDPE) is a colorless, translucent particle with long branched chains in molecules, not closely intermolecular, and low temperature toughness.
聚的加工與應用
The processing and application of polyethylene
聚可用吹塑、擠出、注射成型等加工，廣泛應用于制造薄膜、中空制品、纖維和日用雜品等。
Polyethylene can be processed by blow molding, extrusion and injection molding. It is widely used in the manufacture of thin films, hollow products, fiber and sundry goods.
?